The End

Posted by Toni - November 11th, 2016

Implementation of the corners' in the paw "requires a large skill of the carpenters, in this case, the ends of the logs made double 'dovetail' with the angular spine. Given that the value of carpentry and so is high enough, it is wiser to abandon the second option to avoid unnecessary costs. The most cost-effective and easy connectivity – in the end groove, when on the side of a timber is a groove, and at the end of another timber – a spike. Each timber is made from the bottom of the groove which logs are placed on the surface of another timber, the adjacent beams connect with each other pins (dowels, pins). The wall is composed of timber is easy. Take the timber section of 15×15 or 15h18 and fit 'in the leg' or in the end groove, sometimes do without the dowel, using metal or wood (oak or softwood), the pins are set at the corners and in the middle of the bar. Gasket between the logs were originally made or tow moss.

It is highly recommended to reject such an antediluvian version. Now there is great stuff – tape mezhventsovy insulation, made from jute or linen. This material is sold in rolls, cut into strips fit between the logs or timbers, fastened stapler. Everything happens very fast and easy, and besides, you'll be spared the tedious konopatki. Jute, though more expensive, higher quality linen. It also contains a lignin content (almost as in wood) and when the frame shrinks, Jute insulation is compressed and becomes very strong and reliable insulation, do not let any cold or moisture.

Tags: ,

Comments are closed.

Blog Home